 | 3 Phase Frequency Converter & |
| 3 Phase Rectified D.C. |
| Spot Weld - Seam Weld - Rollspot Weld |
| Fully Programmable 16 Weld Schedules |
| Pulsating Heat Control |
| Programmable Forge Control |
| Programmable Weld PSI |
| Programmable Forge PSI |
| Programmable Hi-Low Limit Weld PSI |
| Programmable Hi-Low Limit Forge PSI |
| Programmable Motor Speed |
| Programmable First Spot Heat % In Seam |
| Intermittent Drive Motor On/Off Control |
| 5 Years Memory Retention Without Power |
| Scanner Interlock |
| RS232 Interface |
| INPUT POWER: 200 VAC to 480 VAC 60 Hz |
| AC OUTPUT TO VALVES: 115 VAC 150 VA |
| Solid State Contactors Available in Ranges from 300 Amps to 3200 Amps |
| Ignition Firing Module to Fire Ignitrons Size A through E |
| Solid State Relay to Operate Squeeze Valve in Spot - Seam - Rollspot Mode
|
| Solid State Relay to Turn On Motor or Air Brake in Seam or Rollspot Mode
|
| Dual Pilot Air Pressure Regulator |
| Dual Air Volume Booster 150 CFM |
| DC Motor Controller 0 - 90 V or 0 - 180 V .5 HP to 2 HP |
| Retraction and Two Stage Foot Switch Input |
| Floating Input/Output to Central Interlock Scanner |
| Visual Peripheral Diagnostics |
| RS232 Connector to Upload and Download Weld Schedules to Laptop |
| Remote Control Box Model 325A with the following switches: Repeat, Weld,
Tip Dress, Positive - Alternate - Negative Polarity, Seam - Spot - Roll, Next
Weld Schedule (quick selection between two weld schedules), Program Lock Key,
One of Sixteen Weld Schedule Selector Switch |
A
World Of Resistance Welding
